Theory Audio Design SB25AW Outdoor on-wall speaker (each)
SB25AW High Output Multi-Use All-Weather Loudspeaker
You have never had such a compact and capable loudspeaker in your system design toolbox before.
The Theory sb25aw is an all-weather, 4-ohm or 70V/100V, version of the remarkable sb25 indoor surface mount loudspeaker.
Like the sb25, the sb25aw is a wide-bandwidth, high-output multi-use loudspeaker, perfect for restaurants, bars, hotels, retail stores, houses of worship and anywhere high-resolution, high-fidelity background or foreground sound is needed. The sb25aw incorporates a durable perforated stainless steel grille, water-tight loudspeaker wire entry point, selectable hi-z or low-z operating modes, and has an optional yoke mounting bracket available.
Capable of astonishing range and output, the 3.8โ deep sb25 is literally a jack of all trades and will have you rethinking how you incorporate sound in your next high-value project.
| Description: | High-Output Weather Resistant Surface Mount Loudspeaker |
| Operation: | Passive, Requires 1 Theory Loudspeaker Controller Amp Channel |
| 4-ohm or 70V/100V Operation, Selectable | |
| DSP Requirements: | Requires Model-Specific Theory-Certified DSP Loudspeaker Processing |
| Drivers: | 2 x 5" Theory Carbon Fiber Low Frequency Drivers |
| 1 x 1.4" Theory Advanced Polymer High Frequency Compression Driver | |
| Enclosure: | Powder Coated and Anodized Extruded and Machined Aluminum, Perforated Aluminum Grille |
| Terminals: | Euroblock Connector with Parallel Output |
| Outdoor Capability: | Indoor and Outdoor Use |
| Mounting Points: | Two Theory VersaSlotTM T-Slots Running Full Height with 4 x M5 Captive Nuts |
| Included Z-Clips | |
| Optional Yoke Bracket, Universal Mount Adapter, and Table Top Stand | |
| Bandwidth: | 54Hz -23kHz, -6dB; |
| 46Hz-24kHz, -10dB | |
| Coverage: | 125 Degrees Conical |
| 160 Degrees Conical (-12dB @ 10kHz) | |
| Sensitivity: | 94dB (LF); 108dB (HF) SPL/2.83V/1m |
| Power Handling: | 200W (AES); |
| 400W (Continuous); | |
| 800W (Peak) | |
| Minimum Recommended Power: | 50W rms |
| Maximum Output: | 117dB / 1m (based on AES power rating) |
| 123dB SPL / 1m (peak) | |
| Nominal Impedance: | 4-ohms; Hi-Z (70V/100V) Selectable |
| Transformer Taps: | 60W, 30W, 15W, (7.5W, 70V) |
| Colors: | Black, White |
| Dimensions: | 21.5" H x 9.5" W x 3.8" D (546mm H x 241mm W x 97mm D) |
| Total Installed Depth (Z-clip Mount): | 3.93" D (100mm) Including Z-Clip Mounting Brackets |
| Net Weight: | 24.5 lbs. (11.1 kg) |
| Included Accessories: | Theory Z-Clip Mounting Brackets (male and female) for Flat Surface Mounting |
| sb25aw Waterproof Terminal Cover | |
| Optional Accessories: | |
| sb25aw Yoke Bracket | |
| sb Table Top Stand | |
| sb25 Universal Mount Adapter: | |
| Mount Hole Patterns: 75mm and 100mm VESA Square, 2.0โ x 4.25โ 1/4โ-20 and 2.75โ x 5.0โ 1/4โ-20 Threads, Mount Hole for 1/2" Rigid Conduit Hub (1/2" conduit mount) | |
| Compatible 3rd Party Mounts: | |
| Omnimount 25.0W Wall Ball Mount | |
| Omnimount 25.0C Ceiling Ball Mount | |
| Adaptive Technologies Multimount MM-016-BT Wall Multi-Mount | |
| Adaptive Technologies Multimount MM-017 Wall Pan and Tilt Mount | |
| Adaptive Technologies Multimount MM-018 Ceiling Pan and Tilt Mount |
SB25AW High Output Multi-Use All-Weather Loudspeaker
You have never had such a compact and capable loudspeaker in your system design toolbox before.
The Theory sb25aw is an all-weather, 4-ohm or 70V/100V, version of the remarkable sb25 indoor surface mount loudspeaker.
Like the sb25, the sb25aw is a wide-bandwidth, high-output multi-use loudspeaker, perfect for restaurants, bars, hotels, retail stores, houses of worship and anywhere high-resolution, high-fidelity background or foreground sound is needed. The sb25aw incorporates a durable perforated stainless steel grille, water-tight loudspeaker wire entry point, selectable hi-z or low-z operating modes, and has an optional yoke mounting bracket available.
Capable of astonishing range and output, the 3.8โ deep sb25 is literally a jack of all trades and will have you rethinking how you incorporate sound in your next high-value project.
| Description: | High-Output Weather Resistant Surface Mount Loudspeaker |
| Operation: | Passive, Requires 1 Theory Loudspeaker Controller Amp Channel |
| 4-ohm or 70V/100V Operation, Selectable | |
| DSP Requirements: | Requires Model-Specific Theory-Certified DSP Loudspeaker Processing |
| Drivers: | 2 x 5" Theory Carbon Fiber Low Frequency Drivers |
| 1 x 1.4" Theory Advanced Polymer High Frequency Compression Driver | |
| Enclosure: | Powder Coated and Anodized Extruded and Machined Aluminum, Perforated Aluminum Grille |
| Terminals: | Euroblock Connector with Parallel Output |
| Outdoor Capability: | Indoor and Outdoor Use |
| Mounting Points: | Two Theory VersaSlotTM T-Slots Running Full Height with 4 x M5 Captive Nuts |
| Included Z-Clips | |
| Optional Yoke Bracket, Universal Mount Adapter, and Table Top Stand | |
| Bandwidth: | 54Hz -23kHz, -6dB; |
| 46Hz-24kHz, -10dB | |
| Coverage: | 125 Degrees Conical |
| 160 Degrees Conical (-12dB @ 10kHz) | |
| Sensitivity: | 94dB (LF); 108dB (HF) SPL/2.83V/1m |
| Power Handling: | 200W (AES); |
| 400W (Continuous); | |
| 800W (Peak) | |
| Minimum Recommended Power: | 50W rms |
| Maximum Output: | 117dB / 1m (based on AES power rating) |
| 123dB SPL / 1m (peak) | |
| Nominal Impedance: | 4-ohms; Hi-Z (70V/100V) Selectable |
| Transformer Taps: | 60W, 30W, 15W, (7.5W, 70V) |
| Colors: | Black, White |
| Dimensions: | 21.5" H x 9.5" W x 3.8" D (546mm H x 241mm W x 97mm D) |
| Total Installed Depth (Z-clip Mount): | 3.93" D (100mm) Including Z-Clip Mounting Brackets |
| Net Weight: | 24.5 lbs. (11.1 kg) |
| Included Accessories: | Theory Z-Clip Mounting Brackets (male and female) for Flat Surface Mounting |
| sb25aw Waterproof Terminal Cover | |
| Optional Accessories: | |
| sb25aw Yoke Bracket | |
| sb Table Top Stand | |
| sb25 Universal Mount Adapter: | |
| Mount Hole Patterns: 75mm and 100mm VESA Square, 2.0โ x 4.25โ 1/4โ-20 and 2.75โ x 5.0โ 1/4โ-20 Threads, Mount Hole for 1/2" Rigid Conduit Hub (1/2" conduit mount) | |
| Compatible 3rd Party Mounts: | |
| Omnimount 25.0W Wall Ball Mount | |
| Omnimount 25.0C Ceiling Ball Mount | |
| Adaptive Technologies Multimount MM-016-BT Wall Multi-Mount | |
| Adaptive Technologies Multimount MM-017 Wall Pan and Tilt Mount | |
| Adaptive Technologies Multimount MM-018 Ceiling Pan and Tilt Mount |
Original: $2,360.33
-65%$2,360.33
$826.12Description
SB25AW High Output Multi-Use All-Weather Loudspeaker
You have never had such a compact and capable loudspeaker in your system design toolbox before.
The Theory sb25aw is an all-weather, 4-ohm or 70V/100V, version of the remarkable sb25 indoor surface mount loudspeaker.
Like the sb25, the sb25aw is a wide-bandwidth, high-output multi-use loudspeaker, perfect for restaurants, bars, hotels, retail stores, houses of worship and anywhere high-resolution, high-fidelity background or foreground sound is needed. The sb25aw incorporates a durable perforated stainless steel grille, water-tight loudspeaker wire entry point, selectable hi-z or low-z operating modes, and has an optional yoke mounting bracket available.
Capable of astonishing range and output, the 3.8โ deep sb25 is literally a jack of all trades and will have you rethinking how you incorporate sound in your next high-value project.
| Description: | High-Output Weather Resistant Surface Mount Loudspeaker |
| Operation: | Passive, Requires 1 Theory Loudspeaker Controller Amp Channel |
| 4-ohm or 70V/100V Operation, Selectable | |
| DSP Requirements: | Requires Model-Specific Theory-Certified DSP Loudspeaker Processing |
| Drivers: | 2 x 5" Theory Carbon Fiber Low Frequency Drivers |
| 1 x 1.4" Theory Advanced Polymer High Frequency Compression Driver | |
| Enclosure: | Powder Coated and Anodized Extruded and Machined Aluminum, Perforated Aluminum Grille |
| Terminals: | Euroblock Connector with Parallel Output |
| Outdoor Capability: | Indoor and Outdoor Use |
| Mounting Points: | Two Theory VersaSlotTM T-Slots Running Full Height with 4 x M5 Captive Nuts |
| Included Z-Clips | |
| Optional Yoke Bracket, Universal Mount Adapter, and Table Top Stand | |
| Bandwidth: | 54Hz -23kHz, -6dB; |
| 46Hz-24kHz, -10dB | |
| Coverage: | 125 Degrees Conical |
| 160 Degrees Conical (-12dB @ 10kHz) | |
| Sensitivity: | 94dB (LF); 108dB (HF) SPL/2.83V/1m |
| Power Handling: | 200W (AES); |
| 400W (Continuous); | |
| 800W (Peak) | |
| Minimum Recommended Power: | 50W rms |
| Maximum Output: | 117dB / 1m (based on AES power rating) |
| 123dB SPL / 1m (peak) | |
| Nominal Impedance: | 4-ohms; Hi-Z (70V/100V) Selectable |
| Transformer Taps: | 60W, 30W, 15W, (7.5W, 70V) |
| Colors: | Black, White |
| Dimensions: | 21.5" H x 9.5" W x 3.8" D (546mm H x 241mm W x 97mm D) |
| Total Installed Depth (Z-clip Mount): | 3.93" D (100mm) Including Z-Clip Mounting Brackets |
| Net Weight: | 24.5 lbs. (11.1 kg) |
| Included Accessories: | Theory Z-Clip Mounting Brackets (male and female) for Flat Surface Mounting |
| sb25aw Waterproof Terminal Cover | |
| Optional Accessories: | |
| sb25aw Yoke Bracket | |
| sb Table Top Stand | |
| sb25 Universal Mount Adapter: | |
| Mount Hole Patterns: 75mm and 100mm VESA Square, 2.0โ x 4.25โ 1/4โ-20 and 2.75โ x 5.0โ 1/4โ-20 Threads, Mount Hole for 1/2" Rigid Conduit Hub (1/2" conduit mount) | |
| Compatible 3rd Party Mounts: | |
| Omnimount 25.0W Wall Ball Mount | |
| Omnimount 25.0C Ceiling Ball Mount | |
| Adaptive Technologies Multimount MM-016-BT Wall Multi-Mount | |
| Adaptive Technologies Multimount MM-017 Wall Pan and Tilt Mount | |
| Adaptive Technologies Multimount MM-018 Ceiling Pan and Tilt Mount |
